K2 Burning Luv Marker MOD 11.0 binding adjustments

K2 Burning Luv Marker MOD 11.0 binding adjustments

Started by Vboy13 in Ski Hardware - 8 Replies

Login
To Create or Answer a Topic

Vboy13 posted 21-Dec

After countless searching I cannot find the exact answer.

I bought a pair of K2 Burning Luv Skis with Marker MOD 11.0 bindings on them. I'm just trying to increase the size to fit the boot. The only 2 screws that are visible is the DIN setting screws, one in the toe, the other in the heel. I did locate a hidden screw, thanks to someone's post, under a sticker in front of the toe.

I cannot find the screw that unlocks the binding from the rail. Where the unlock screw normally is, on the heel below the DIN screw, is what appears to be a plastic button with an arrow that points in towards the heel binding. I tried to press it with a finger, that does not work, my other option is to try a hammer and punch? But I thought I would ask first to see if anyone knows something I am missing

Any help would be appreciated

Dobby
reply to 'K2 Burning Luv Marker MOD 11.0 binding adjustments '
posted 21-Dec

This may be of some use: https://snowheads.com/ski-forum/viewtopic.php?t=27524

Vboy13
reply to 'K2 Burning Luv Marker MOD 11.0 binding adjustments '
posted 21-Dec

Thanks for the response
I've read that but the only screws I can find that I thought he was describing did not get the binding to budge when removed
In the picture I'll circle the only 3 screws that I could find

SwingBeep
reply to 'K2 Burning Luv Marker MOD 11.0 binding adjustments '
posted 21-Dec

Not absolutely certain, but I think the release screw is located under the grey plastic cover right at the back of the binding. After you have adjusted them to the correct length make sure you set the forward pressure correctly otherwise, they won't work properly.

Vboy13
reply to 'K2 Burning Luv Marker MOD 11.0 binding adjustments '
posted 21-Dec

Thanks for the reply.

I'll check under that grey cover in the back again but it is kind of like a hinged tab that didn't seem to want to go all the way down because it was hitting the ski itself. I'll try again when I get home and take a picture of what Im talking about

Vboy13
reply to 'K2 Burning Luv Marker MOD 11.0 binding adjustments '
posted 21-Dec

Here is a picture of that grey plastic cover. It's on a hinge and won't open any more than that because it's against the ski

SwingBeep
reply to 'K2 Burning Luv Marker MOD 11.0 binding adjustments '
posted 21-Dec

There is a shaft that leads to the grey cover.



If you can open the cover you should see a screw head.


Vboy13
reply to 'K2 Burning Luv Marker MOD 11.0 binding adjustments '
posted 21-Dec

Holy crap! That grey cover, all I had to do was pull back on it as far as it will go and twist to the side and it unlocked the entire binding.
Just had to remove that hidden screw in the front under the sticker.
Thank you so much!
You are the best

Topic last updated on 21-June-2019 at 05:10

Not a Member?

FREE Snow Reports by e-mail.

Save on Ski Hire

Save up to 50%

+5% for 4+ Ski Packs

+10% for 10+ Ski Packs

Discount Ski Hire

7th day Free on selected dates

SkiSet

Sponsored Links

Forum Listing Key

Unread Post
Hot Topic
Sticky (important)
Announcement

The views and opinions presented in the J2Ski Forums are solely those of their respective authors and do not represent those of J2Ski Ltd. Objectionable Content may be notified by sending a Private Message to Admin.

J2Ski logo

Search
J2Ski

Snow Reports
by eMail